| Parameter | SRC-S(W)-503 | SRC-S-503-L4 |
|---|---|---|
| Rated power | 180HP / 135KW | |
| Exhaust volume (50Hz / 60Hz) | 562 / 674 m³/hr | |
| Refrigerant Type | R22, R407C, R410a, R404A, R507A | |
| Weight | 1010 KG | |
| Oil Charge | 19 L | |
| Voltage | 400/3/50Hz – 460/3/60Hz | |
| Cooling Capacity Regulation | 100%, 75%, 50%, 25% (stepless 100%–25%) | |
| LRA Y/Δ | 453 / 1333A | 543 / 1645A |
A: Provide target cooling capacity, design evaporating and condensing temperatures, target refrigerant type, power supply standards, and whether an economizer loop or liquid injection is required.
A: Pre-heat the oil sumps via the 275W heater prior to start-up to clear liquid refrigerant, verify phase rotation for correct rotor spinning, and check that oil level and filter cleanliness meet startup standards.
A: The INT69 SNY module constantly processes temperature signals from six series-connected PTC sensors inside the motor coils and discharge port, tripping the control relay if limits are exceeded.
A: Monitor oil level clarity through the sight glass, inspect suction filter pressure drop, test oil quality periodically for viscosity loss, and inspect electrical connections on the terminal box.
